人妻,日韩精品一区二区三区蜜臀,久久伊人精品,亚洲一区二区三区AV天堂

NEWS
新聞資訊
MORE +
scroll down

深圳5mm草帽LED規格書

發布時間:

2023-10-11 10:00


5mm草帽LED是一種發光二極管,能夠?qū)㈦娔苻D(zhuǎn)換為光能,他具有高效,低功率壽命長等特點,廣泛應用于家電指示燈珠、室內照明、交通指示燈珠
他的外觀
5mmLED的外觀是草帽型號,直徑為5mm,長度4.8mm表面有金屬引腳,可以通過焊接和插接與電路鏈接
發光顏色:5mmLED紅色、藍色。綠色黃色
膠體顏色:紅、藍、綠、黃、透明等
發光強度:是指單位面積內LED所發射的光功率,通常用MCD表示,不同發光顏色
亮度等級也不同
一般功率是:0.06W工作電壓是1.8-3.6V
工作電流:200ma這里的工作

Parameter

Symbol

Rating

Unit

Power Dissipation

PD

200

mW

Forward Current (DC)

IF

60

mA

Peak Forward Current(Pulse width0.1msec duty1/10)

IFP

100

mA

Reverse Voltage

VR

5.0

V

Electro-Static-Discharge

ESD

1000

V

Operation Temperature Range

Topr

-25to+85

Storage Temperature Range

Tstg

-40to+100

Lead Soldering Temperature(3.0mm from body) for 5 seconds

260

 

 

注意事項

一、If you need pin to be bent because of design:
1、The lead frame can only be bent or cut when it is 3mm or above away from the colloid.
2、The molding of material if needed must be finished before soldering, while molding the PIN is not allowed to be the fulcrum and must be finished by professional with fixture;
3、Lead frame molding must guarantee that the space between lead is same as Circuitry Board
4、High voltage static electricity could be produced while molding the Pin because of vibration friction of machine, so the machine must be reliably grounding (By way of blowing ion fan to eliminate static electricity)
二、Soldering Condition:
1、Do not conduct the electricity while soldering the LED
2、Do not forces while the lead are in the heating condition.
3、Max. soldering condition:
 Manual soldering: Wave soldering
Max. Power of iron: 30 W  Highest Warm up temperature:120℃
Highest Temperature: 300 ℃  Highest Dip soldering temperature 260 ℃
Longest Soldering time: 3 seconds Longest Dip soldering time: 5 seconds
Soldering position: Dip soldering position:
3mm above from the colloid base   3mm above from the colloid base.
三、Anti-static notice :
1、All the LED instrument must be grounding
2、All the people, who are possible to touch the LED must wear anti-static wrists and gloves.
3、Any LED damaged by static will appear some bad characters, such as , leakage current increase, Static forward voltage decrease.
四、Over current protection:
1、Add protective resistor in series to make it work stable.
2、Resistor value formula: R=(VCC-VF)/IF(VCC is power supply voltage, VF is LED drive voltage, IF is forward current.)
五、Electrical performance test and application:
1、While testing VF, brightness and wavelength, the current must be set with 20mA; test VR, IR must be set with 10uA; Test IR, VR must be set with 5V.
2、Whiling testing and using LED, LED must be provided with the same current and tested by constant current source, and then we can make sure the brightness and consistency of other characteristics
3、LED used under the environment temperature between -30 ℃ ~+60 ℃
4、When the products are well sorted, please do not use it to the same products with different classes or bag Numbers (Marked in the label), so as to avoid the color and brightness difference. If it is necessary to use with mix bags, please use strictly according to the sequence of bag number. (Not recommended to use like this)

一、如果由于設計原因需要彎曲引腳:

1、 引線框只有在距離膠體3mm或以上時才能彎曲或切割。

2、 如果需要,材料的成型必須在焊接前完成,而PIN的成型不允許作為支點,必須由專業人員用夾具完成;

3、 引線框成型必須保證引線之間的空間與電路板相同

4、 由于機器的振動摩擦,在成型引腳時可能會產生高壓靜電,因此機器必須可靠接地(通過吹離子風機消除靜電)

二、焊接條件:

1、 焊接LED時請勿導電

2、 導線處于加熱狀態時,請勿用力。

3、 最大。焊接條件:

手工焊接:波峰焊

熨斗最大功率:30W最高預熱溫度:120℃

最高溫度:300℃最高浸焊溫度260℃

最長焊接時間:3秒最長浸焊時間:5秒

焊接位置:浸焊位置:

距膠體基底3mm以上。

三、防靜電注意事項:

1、 所有LED儀表必須接地

2、 所有可能接觸LED的人都必須佩戴防靜電手腕和手套。

3、 任何被靜電損壞的LED都會出現一些不良特性,如漏電流增加、靜態正向電壓降低。

四、過電流保護:

1、 串聯增加保護電阻,使其工作穩定。

2、 電阻值公式:R=(VCC-VF)/IF(VCC為電源電壓,VF為L(zhǎng)ED驅動電壓,IF為正向電流。)

五、電氣性能測試和應用:

1、 在測試VF、亮度和波長時,電流必須設置為20mA;測試VR,IR必須設置為10uA;測試IR、VR必須設置為5V。

2、 Whiling測試和使用LED,LED必須提供相同的電流,并通過恒流源進行測試,然后我們才能確保其他特性的亮度和一致性

3、 LED在-30℃~+60℃的環境溫度下使用

4、 當產品分類良好時,請不要將其用于不同類別或袋號的同一產品(在標簽中標記),以避免顏色和亮度差異。如果必須與混合袋一起使用,請嚴格按照袋號的順序使用。(不建議這樣使用

5MM草帽,5mmLED

資訊推薦

< 1...151617...69 > 前往 頁
logo

服務銷售熱線

地址:廣東省深圳市寶安區西鄉固戍航城大道華創達工業園E棟六樓

產品咨詢留言

微信公眾號

微信公眾號


©2022 深圳市海隆興光電子有限公司 

網站建設:中企動力 龍崗  |  SEO標簽 

南召县| 久久男人AV资源网站无码| 在线观看国产三级视频| 青草网| 性色av| 91久久精品日日躁夜夜躁欧美| 91丨porny丨东北熟女| 无码专区天天躁天天躁在线| 国产丰满乱子伦无码专| 国产精品久久久久7777| 欧美乱码精品一区二区三区卡| 国产精品久久久一区二区| caopron超碰人人看| 亚洲精品一区二区口爆| 狠狠躁夜夜躁人人爽天天天天97| 无码人妻丰满熟妇区五十路| 超H公用妓女精便器系列小说| 欧美精品视频一区二区三区| AV天堂东京热无码专区| 色99久久久久高潮综合影院| 久久99精品国产麻豆宅宅 | 把女人弄爽特黄A大片片| 狠狠色丁香久久婷婷综合蜜芽五月| YYY6080韩国三级理论| 亚洲色偷拍区另类无码专区| caoporm国产精品视频免费| 无码日韩人妻AV一区免费| 精品欧美成人高清在线观看| 亚洲综合激情另类专区| 末成年女AV片一区二区| 欧美高清熟妇啪啪内射不卡自拍| 四虎成人精品国产永久免费| 国产95在线 | 亚洲| 色欲人妻综合网| 最近免费中文字幕MV在线电影| 西瓜影院| 97精品尹人久久大香线蕉 | 国产激情综合在线观看| 强行交换配乱婬BD| 色妞色综合久久夜夜| 国产精品福利自产拍久久|